Related Experiment Video
Updated: Jul 20, 2026

Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Removal of arsenic from groundwater using low cost ferruginous manganese ore
S Chakravarty1, V Dureja, G Bhattacharyya
1Analytical Chemistry Division, National Metallurgical Laboratory Jamshedpur, India.
Abstract:
A low cost ferruginous manganese ore (FMO) has been studied for the removal of arsenic from groundwater. The major mineral phases present in the FMO are pyrolusite and goethite. The studied FMO can adsorb both AS(III) and As(V) without any pre-treatment, adsorption of As(III) being stronger than that of As(V). Both As(II) and As(V) are adsorbed by the FMO in the pH range of 2-8. Once adsorbed, arsenic does not get desorbed even on varying the pH in the range of 2-8. Presence of bivalent cations, namely, Ni2+, Co2+ Mg2+ enhances the adsorption capability of the FMO. The FMO has been successfully used for the removal of arsenic from six real groundwater samples containing arsenic in the range of 0.04-0.18 ppm. Arsenic removals are almost 100% in all the cases. The cost of the FMO is about 50-56 US$ per metric tonne.
Related Concept Videos
Precipitation and Co-precipitation
Extraction: Advanced Methods
Microbes and Other Elemental Cycles
Microbial Bioremediation of Uranium
Microbial Leaching
Acid Mine Drainage

