Examination of electrostatic potential distribution across an implanted p-n junction by electron holography

In the manufacture of semiconductor microelectronic devices, a p-n junction is formed usually by implanting a high concentration of impurity into a less heavily doped region and then heat annealing. A Si/Si p-n junction test sample has been made following the above practical process and thinned for electron holographic observation by using argon ion-milling. From the reconstructed phase image, the phase shift induced by potential drop across p-n junction can be seen clearly. To characterize quantitatively this potential drop, the mean inner potential V0 of silicon was measured precisely by electron holographic method. By measuring 25 different crystalline silicon spheres with diameter ranging from 40 to 170 nm, an average result of V0 = 12.16 +/- 0.83 V was obtained. By using this V0 value, a quantitative measurement yields the potential drop approximately 0.70 V, which is reasonably consistent with expected Si/Si junction parameter. The thickness of electric dead layer in depletion region produced from this measuring is approximately 20 nm on each sample surface.