Related Experiment Video
Updated: Sep 30, 2026

Measuring the Shape and Size of Activated Sludge Particles Immobilized in Agar with an Open Source Software Pipeline
Published on: January 30, 2019
Assessment of effluent turbidity in mesophilic and thermophilic activated sludge reactors - origin of effluent
J C T Vogelaar1, J B van Lier, B Klapwijk
1Sub-department of Environmental Technology, Wageningen University, P.O.Box 8129/6700 EV Wageningen, The Netherlands. Jaap.Vogelaar@algemeen.mt.wag-ur.nl
Abstract:
Two lab-scale plug flow activated sludge reactors were run in parallel for 4 months at 30 and 55 degrees C. Research focussed on: (1) COD (chemical oxygen demand) removal, (2) effluent turbidity at both temperatures, (3) the origin of effluent colloidal material and (4) the possible role of protozoa on turbidity levels. Total COD removal percentages over the whole experimental period were 66+/-7% at 30 degrees C and 53+/-11% at 55 degrees C. Differences in total COD removal between both systems were due to less removal of soluble and colloidal COD at 55 degrees C compared to the reference system. Thermophilic effluent turbidity was caused by a combination of influent colloidal particles that were not effectively retained in the sludge flocs, and erosion of the thermophilic activated sludge itself, as shown by denaturing gradient gel electrophoresis (DGGE) profiles. DGGE analysis of PCR-amplified 16S rDNA fragments from mesophilic and thermophilic sludge differed, indicating that different microbial communities were present in the two reactor systems. The effects of protozoal grazing on the effluent turbidity of both reactors was negligible and thus could not account for the large turbidity differences observed.
Related Concept Videos
Coagulation
Biological Treatment of Effluent and Waste Water
Colloidal precipitates
Colloids
Colloids and Suspensions
Microbial Wastewater Treatment

