Related Experiment Video
Updated: Sep 29, 2026

Automated Hospital Room Disinfection Utilizing a Novel Aerosolized Hydrogen Peroxide Microdroplet Disbursing Technology
Published on: February 24, 2026
Personal exposure level and environmental ethylene oxide gas concentration in sterilization facilities of hospitals
Hajime Hori1, Katsuya Yahata, Kazuya Fujishiro
1Departament of Environmental Management, School of Health Sciences, University of Occupational and Environmental Health, Kitakyushu, Japan.
Abstract:
Personal and environmental (stationary) ethylene oxide (EO) gas concentrations in gas sterilization facilities were measured at six workplaces in five hospitals. An ethylene oxide gas monitor (3M #3551) was used for both personal and stationary samplings. A gas detector tube was also used for instantaneous sampling. In most workplaces, the personal exposure levels of EO were below the detection limit of the gas monitor. Most of the time-weighted average (TWA) concentrations by the stationary sampling were below the threshold limit value of EO (TLV-TWA = 1 ppm), but in one workplace, more than 4 ppm of EO were detected in front of the sterilizer in a clean room during a 24-hour measurement, although all the personal exposure levels were below the detection limit. Method of aeration after the sterilization was very important for reducing the EO exposure. The EO gas concentrations in two workplaces where sufficient aeration was carried out were below the detection limit in all the stationary samples. In one workplace where insufficient aeration was performed, EO was detected from 16 of 17 stationary samples, and more than 90-200 ppm of EO was determined by the gas detector tube near the worker's face at the moment when the door of the sterilizer was opened and the sterilized materials were removed.
Related Concept Videos
Methods of Sterilization II: Chemical Methods
Using chemical sterilization rather than heat to clean out equipment is recommended. It eradicates and removes all bacteria,...
Transmission-based Precautions II: Airborne and Protective Environment
Airborne precautions:
Use airborne precautions when treating patients known or suspected to have diseases that spread through the air—for example, tuberculosis or measles. These organisms are present in smaller droplets expelled by an infected person and...
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...
Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
Cleaning, Sterilization, and Disinfection
Cleaning
The cleaning process usually involves using water with detergents or enzymatic cleaner and removing foreign material from objects and surfaces, including organic material such as body fluids or inorganic material like soil. Cleaning is performed before high-level disinfection and sterilization because foreign materials on the cover of the devices interfere with process...
Healthcare Associated Infections II: Preventive Measures
The best practices for preventing healthcare-associated infections include hand hygiene, patient risk...

