Preparation and degradation characteristic study of bone repair composite of DL-polylactic...

To explore the preparative method and study the degradation characteristics of bone repair composite of DL-polylactic acid (PDLLA)/hydroxyapatite(HA)/decalcifying bone matrix (DBM) in vitro.

An emulsion blend method was developed to prepare the composite of PDLLA/HA/DBM in weight ratio of PDLLA:HA:DBM = 1.5-2:1-1.5:1. The dynamic changes of weight, biomechanical property and pH value of PDLLA/HA/DBM and PDLLA in phosphate buffered saline (PBS, pH 7.4) were studied respectively through degradation tests in vitro.

Without being heated, PDLLA, HA and DBM could be synthesized with the emulsion blend method as bone composite of PDLLA/HA/DBM, which had both osteoconductive and osteoinductive effects. The diameter of the aperture was 100-400 microm and the gap rate was 71.3%. During degradation, the pH value of PDLLA solution decreased lightly within 2 weeks, but decreased obviously at the end of 4 weeks and the value was 4.0. While the pH value of PDLLA/HA/DBM kept quite steady and was 6.4 at the end of 12 weeks. The weight of PDLLA changed little within 4 weeks, then changed obviously and was 50% of its initial weight at the end of 12 weeks. While the weight of PDLLA/HA/DBM changed little within 5 weeks, then changed obviously and was 60% of the initial weight at the end of 12 weeks. The initial biomechanical strength of PDLLA was 1.33 MPa, decreased little within 3 weeks, then changed obviously and kept at 0.11 MPa at the end of 12 weeks. The initial biomechanical strength of PDLLA/HA/DBM was 1.7 MPa, decreased little within 4 weeks, then changed obviously and kept at 0.21 MPa at the end of 12 weeks.

The emulsion blend method is a new method to prepare bone repair materials. As a new bone repair material, PDLLA/HA/DBM is more suitable for regeneration and cell implantation, and the environment during its degradation is advantageous to the growth of bone cells.