Related Experiment Video
Updated: Sep 28, 2026

Simple In-House Ultra-High Performance Capillary Column Manufacturing with the FlashPack Approach
Published on: December 4, 2021
Using different types of capillary chromatographic columns as denudation traps: a comparison of sorption properties
M Dudek1, A Kloskowski, L Wolska
1Department of Analytical Chemistry, Chemical Faculty, Technical University of Gdansk (TUG) 11/12 G. Narutowicza St., 80-952 Gdansk, Poland.
Abstract:
The research presented concerns segments of capillary chromatographic columns of different types (WCOT, SCOT, PLOT) used as traps for collection of samples of volatile organic analytes from a stream of air utilizing the equilibrium denudation technique. During the model experiments (utilizing standard mixtures), values of the partition coefficients (Kfs) were determined for volatile organic compounds frequently occurring as pollutants of atmospheric air (benzene, toluene, ethylbenzene, o-xylene, chlorobenzene). The conducted research demonstrated that the stationary phase film thickness did not affect the partition coefficient value. It was also proved that there is no dependence between the manner of applying the stationary phase in the column and the partition coefficient value.
Related Concept Videos
Types Of Column Chromatography
Gel Filtration Chromatography
When the...
Chromatography: Introduction
The phase in which the compounds linger or on which the compounds adsorb is called the stationary phase, whereas the mobile phase is the solvent that carries the solutes to be analyzed. In traditional column chromatography, the mixture flows through the stationary phase, and the compounds partition between the stationary and mobile phases...
Ion-Exchange Chromatography
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
High-Performance Liquid Chromatography: Types of Detectors
Silica Gel Column Chromatography: Overview
Polar components tend to bind strongly to the silica gel, causing them to move slowly through the column. In contrast, nonpolar compounds...

