Broadband sound propagation in shallow water and geoacoustic inversion

Part of an experiment to test a measurement package in a shallow water region in the Gulf of Mexico was designed to gather broadband acoustic data suitable for inversion to estimate seabed geoacoustic parameters. Continuous wave tow acoustic signals at multiple frequencies and broadband impulsive source signals were recorded on a horizontal line array in a high-noise environment. Simulated annealing with a normal mode forward propagation model is utilized to invert for a geoacoustic representation of the seabed. Several inversions are made from different data samples of two light bulb implosions, the measured sound speed profiles at the HLA and at the positions of the light bulb deployments, and for two different cost functions. The different cost functions, measured sound speed profiles, and measured time series result in different inverted geoacoustic profiles from which transmission loss is generated for comparison with measurements. On the basis of physical consistency and from the comparison of the transmission loss and time series, a best estimate geoacoustic profile is selected and compared to those obtained from previously reported inversions. Uncertainties in the sound speed profile are shown to affect the uncertainties of the estimated seabed parameters.