Related Experiment Videos
Modeling sorbent injection for mercury control in baghouse filters: I--model development and sensitivity analysis
Joseph R V Flora1, Richard A Hargis, William J O'Dowd
1Department of Civil and Environmental Engineering, University of South Carolina, Columbia, South Carolina 29208, USA.
Abstract:
A two-stage mathematical model for Hg removal using powdered activated carbon injection upstream of a baghouse filter was developed, with the first stage accounting for removal in the ductwork and the second stage accounting for additional removal caused by the retention of carbon particles on the filter. The model shows that removal in the ductwork is minimal, and the additional carbon detention time from the entrapment of the carbon particles in the fabric filter enhances the Hg removal from the gas phase. A sensitivity analysis on the model shows that Hg removal is dependent on the isotherm parameters, the carbon pore radius and tortuosity, the C/Hg ratio, and the carbon particle radius.