Selective remediation of contaminated sites using a two-level multiphase strategy and geostatistics
Related Experiment Video
Updated: Sep 25, 2026

Measuring Carbon-based Contaminant Mineralization Using Combined CO2 Flux and Radiocarbon Analyses
Published on: October 21, 2016
Hirotaka Saito1, Pierre Goovaerts
1Environmental and Water Resources Engineering, Department of Civil and Environmental Engineering, The University of Michigan, Ann Arbor, Michigan 48109-2125, USA. hirotaka@engin.umich.edu
Abstract:
Selective soil remediation aims to reduce costs by cleaning only the fraction of an exposure unit (EU) necessary to lower the average concentration below the regulatory threshold. This approach requires a prior stratification of each EU into smaller remediation units (RU) which are then selected according to various criteria. This paper presents a geostatistical framework to account for uncertainties attached to both RU and EU average concentrations in selective remediation. The selection of RUs is based on their impact on the postremediation probability for the EU average concentration to exceed the regulatory threshold, which is assessed using geostatistical stochastic simulation. Application of the technique to a set of 600 dioxin concentrations collected at Piazza Road EPA Superfund site in Missouri shows a substantial decrease in the number of RU remediated compared with single phase remediation. The lower remediation costs achieved by the new strategy are obtained to the detriment of a higher risk of false negatives, yet for this data set this risk remains below the 5% rate set by EPA region 7.
Related Concept Videos
Microbial Bioremediation of Uranium
Microbial Bioremediation of Pesticides
Bioremediation
Microbial Bioremediation of Hydrocarbons
Strategies for Assessing and Addressing Confounding
Confounding can be addressed at both the design phase of a study and through analytical methods after data...
Microbial Wastewater Treatment

