Calibration system and analytical considerations for quantitative sesquiterpene measurements in air

Sesquiterpenes (C15H24, SQT) are semi-volatile organic compounds emitted from vegetation and are of interest for air quality considerations because of their suspected contribution to the formation of secondary aerosol. This article investigates the application of a capillary diffusion method for the generation of standard atmospheres of 16 SQT and four other related semi-volatile compounds. This instrument subsequently has been used in the testing of analytical materials, protocols and calibration of air sampling methods. SQT DB-1 retention indices, vapor pressures at 25 and 75 degrees C, and diffusion coefficients were determined. A quantitative, on-line GC method yielded improved results (median relative standard deviation of 5.0-6.1%) for the diffusion rate determination in comparison to a gravimetric approach (median relative standard deviation 18%). The GC method also allowed identifying errors in the gravimetric method stemming from residual solvent evaporation, impurities, and chemical analyte losses. Stainless steel, glass, nickel and PTFE tubing that were tested for transfer lines and a sampling loop had to be kept at temperatures in excess of approximately 110 degrees C in order to prevent significant analytical errors from the stickiness of SQT to these materials. In addition to SQT analysis, results from this research provide general guidelines for gas-phase analysis of related compounds in the C14-C16 volatility range.