Photocatalytic oxidation using a new catalyst--TiO2 microsphere--for water and wastewater treatment

Since the suspended TiO2 powder enjoys free contact with UV irradiation in a photoreactor system, it can generally achieve better efficiency than the immobilized TiO2 catalysts. However, the separation and reuse of this catalyst powder from treated water often limit its application in practice. In this study, a new type of TiO2 catalyst called TiO2 microsphere was prepared by a sol-spraying-calcination method, which can easily settle in its aqueous suspensions under gravity. The SEM image of the TiO2 microsphere samples demonstrated that they had an almost spherical shape with a particle size of 30-160 microm, while the XRD analysis indicated that these TiO2 microspheres still had a crystal size of 8.1 nm. Since these TiO2 microspheres had a porous structure with higher specific surface area and pore volume than normal TiO2 powders, they appeared to have strong adsorption ability in its aqueous suspensions. The photocatalytic activity of the TiO2 microspheres was evaluated in the photodegradations of salicylic acid (SA) and sulfosalicylic acid (SSA). The experimental results showed that the reaction rate using the TiO2 microspheres was similar to that using the TiO2 powders in the SA suspensions and even higher than that in the SSA suspensions. Chemical and physical properties of the TiO2 microspheres and powders that are attributed to photoactivity were discussed based on the Langmuir-Hinshelwood kinetic model. The prepared TiO2 microsphere samples were reused in the photooxidation reaction more than 50 times. It was found that there was no significant weakening in their photoactivity and no change in their particle shape. This TiO2 microsphere catalyst can be simply used to conduct an effective photooxidation in its suspension for water and wastewater treatment with ease of recovery from treated water.