Fabrication of glass micropipettes: a semi-automatic approach for trimming the pipette tip

Micropipettes as research instruments are well established in cell biology, including blood rheology. However, the experimental results are, to some extent, dependent on the quality of the pipette itself; it is usually critical to have the desired pipette internal diameter and a perpendicular tip. Pipette fabrication is a two-step procedure involving: a) the pulling of the pipette from a glass capillary; b) the trimming of the pipette tip. A common method to trim and fracture the pipette tip is the use of a melted glass bead on a heated tungsten wire. Previous devices using this method were often associated with problems because the heated wire varied in length with temperature. As a result, the bead together with the attached pipette tip moved markedly and thus hampered the possibility to obtain a perpendicularly cut pipette tip. An improved design, based on the same principle with a melted glass bead, is thus suggested; it eliminates the problem with a moving glass bead and, in addition, allows semi-automatic pipette trimming by utilizing the heat-induced elongation/retraction of the heated wire to fracture the tip without requiring manual assistance. Furthermore, a simple pipette storing technique is suggested, based on standard laboratory utensils, in order to more easily handle fragile pipettes without risk of breakage.