Pedestrian head impact conditions depending on the vehicle front shape and its construction--full model simulation

For the evaluation of pedestrian protection, the European Enhanced Vehicle-Safety Committee Working Group 17 report is now commonly used. In the evaluation of head injuries, the report takes into account only the hood area of the vehicle. But recent pedestrian accident data has shown the injury source for head injury changing to the windshield and A-pillar from the hood. The head contact points are considered to fall on a parallel to the front shape of the vehicle along the lateral direction, but the rigidity of the outer side construction is different from the center area. The purpose of this study is to consider the reason for the change in injury source for recent vehicle models. The head contact points and contact conditions, speed and angle, are thought to be influenced not only by the vehicle's geometry, but also its construction (rigidity). In this study, vehicle-pedestrian impact simulations were calculated with a finite element model for several hitting positions, including the outer side areas. Full dummy sled tests were conducted to confirm the simulation results. These results show that, for impacts at the outer sides of the vehicle, the head contact points are more rearward than at the vehicle center. In addition, the speed and angle of the head contact were found to be influenced by the pedestrian height.