Related Experiment Video
Updated: Aug 30, 2026

Drawing and Hydrophobicity-patterning Long Polydimethylsiloxane Silicone Filaments
Published on: January 7, 2019
Fractal behavior and scaling law of hydrophobic silica in polyol
Fabrice Saint-Michel1, Frédéric Pignon, Albert Magnin
1Laboratoire de Rhéologie, Université Joseph Fourier-Grenoble I, Institut National Polytechnique de Grenoble, CNRS UMR 5520, 38041 Grenoble Cedex 9, France.
Abstract:
This article examines the rheological properties of a system composed of polyol and colloidal silica. Three types of nanosized silicas with hydrophilic and hydrophobic surfaces were studied: A200 with OH surface groups, R974 with CH(3) surface groups, and R805, which is grafted with a C(8)H(17) alkyl chain. Rheometric measurements showed that the dispersions of R805 silicas have a yield stress at low volume fraction, unlike the R974 and A200 silicas. The plastic behavior of the hydrophobic silicas was quantified by a yield stress sigma(0) and an elastic modulus G'. It is observed that these parameters follow scaling laws as a function of the volume fraction of silica introduced, in the form sigma(0) approximately phi(v)(2.9+/-0.2), G' approximately phi(v)(4.1+/-0.3). Static light scattering (SLS) and small angle neutron scattering (SANS) measurements show a fractal arrangement with a fractal dimension D=1.8 ranging from elementary particles of about 32 nm to aggregates measuring about 6 mum. Correlations were established between the theoretical scaling laws and the experimental scaling laws determined by rheometric measurements. The fractal structure observed in this system is explained by the attractive physical interaction of the octyl chains between the silica particles. Contrary to what has been observed in the past by Khan and Zoeller (J. Rheol. 37 (1993) 1225), the lower molecular weight of the polyol studied here, which has a shorter chain length, allows direct bridging of two separate silicates though alkyl chains, giving rise to the formation of a 3D gel network at volume fractions as low as phi(v)=2.2%.
More Related Videos
07:23Light-induced Patterning and Grafting for Slippery Surfaces based on Silane-coated Nanoporous Structures
Published on: November 14, 2025
11:27Studying Soft-matter and Biological Systems over a Wide Length-scale from Nanometer and Micrometer Sizes at the Small-angle Neutron Diffractometer KWS-2
Published on: December 8, 2016
Related Concept Videos
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Entropy and Solvation
Polymers: Molecular Weight Distribution
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...