Related Experiment Video
Updated: Aug 30, 2026

Roller Microneedle Combined with Tranexamic Acid Solution in Treating Melasma
Published on: January 19, 2024
Prevention of cross-contamination when using microdermabrasion equipment
1Mount Sinai Medical Center, New York, New York, USA. rsheltonmd@aol.com
Abstract:
This article addresses the concern of cross-contamination with the use of microdermabrasion equipment. After performing microdermabrasion on a patient with acne scarring, the instrument was examined for debris on the plateau of the hand piece. Bloody material was noted, indicating that it is not sufficient to only sterilize the distal cap of the hand piece or to use disposable caps. The hand piece itself must be sterilized to prevent the transmission of infectious particles to the next patient receiving treatment with this equipment.
Related Concept Videos
Standard Precaution
Hand hygiene is the most crucial means to prevent the transmission of disease. Employers are legally required to provide their workers with personal protective equipment (PPE) to minimize exposure or contact with...
Handwashing II: Pre-procedure and Initial Procedure Steps
The hand washing procedure itself includes the following steps. First, cover cuts, if any, on hands with a waterproof dressing. Cuts and abrasions can become contaminated with bacteria hindering the ability to clean the area thoroughly. In addition, repeated hand washing can worsen an injury. The nails must be short and clean, without nail paint...
Handwashing III: During the Procedure and Post-Procedure Steps
PPE Use in Healthcare Settings II: Doffing
Handwashing I: Introduction and Types of Equipment
Hand wash basins in clinical areas should have faucets that can be turned on and off without using the hands; that is, they should be non-touch or lever-operated.
Hand hygiene
Hand washing...

