Biological properties of acid etched titanium implants: effect of sandblasting on bone anchorage

The SLA (sandblasted with large grit and acid etched) surface is a textured surface that has been documented to lead to a rapid and strong implant fixation. The purpose of the present study was to determine the contribution of sandblasting in addition to etching to implant anchorage. It was also aimed to determine if the pits carved during etching alone have a bone-interlocking capacity that leads to microanchorage between the implant and bone. SLA implants and machined-and-acid-etched (MA) implants were placed in the maxilla of Land Race pigs. After 10 weeks of healing, they were reverse torqued. The reverse torque of the SLA and MA implants was 157.29 +/- 38.04 N cm and 105.33 +/- 25.12 N cm, respectively. Sandblasting increased bone anchorage by 49.3%; the difference was statistically significant (p =.028). Bone was found attached to both surfaces; bone ingrowth was found in the pits of both surfaces. It is suggested that the two surfaces are able to generate bone interlocking and mechanical coupling at the interface. When finite-element modeling is performed with these surfaces, it is suggested that the bound mode be used instead of the slip mode.