Retention of arsenic and selenium compounds using limestone in a coal gasification flue gas

Volatile arsenic and selenium compounds present in coals may cause environmental problems during coal combustion and gasification. A possible way to avoid such problems may be the use of solid sorbents capable of retaining these elements from flue gases in gas cleaning systems. Lime and limestone are materials that are extensively employed for the capture of sulfur during coal processing. Moreover, they have also proven to have good retention characteristics for arsenic and selenium during combustion. The aim of this work was to ascertain whether this sorbent is also useful for retaining arsenic and selenium species in gases produced in coal gasification. The study was carried out in a laboratory-scale reactor in which the sorbent was employed as a fixed bed, using synthetic gas mixtures. In these conditions, retention capacities for arsenic may reach 17 mg g(-1) in a gasification atmosphere free of H2S, whereas the presence of H2S implies a significant decrease in arsenic retention. In the case of selenium, H2S does not influence retention which may reach 65 mg g(-1). Post-retention sorbent characterization, thermal stability, and water solubility tests have shown that chemical reaction is one of the mechanisms responsible for the capture of arsenic and selenium, with Ca(AsO2)2 and CaSe being the main compounds formed.