Related Experiment Videos
New mechanical retention method for resin and gold alloy bonding
Hiroki Ohno1, Kazuhiko Endo, Masanori Hashimoto
1Department of Dental Materials Science, School of Dentistry, Health Sciences University of Hokkaido, 1757 Kanazawa, Ishikari-Tobetsu, Hokkaido 061-0293, Japan. ohno@hoku-iryo-u.ac.jp
Objective:
The purpose of this study was to improve adhesion between dental adhesive resins and 14K gold alloy by creating a sponge-like structure on the alloy surface which enhanced mechanical bonding.
Methods:
The internal oxidation particles of Cu oxides precipitated on a 14K gold alloy surface after high-temperature oxidation at 800 degrees C in air were removed by pickling with an acid solution to create a sponge-like structure on the alloy surface. A PMMA resin containing 4-META as an adhesive monomer and a self-cured resin without 4-META were used to examine the effects of mechanical and chemical factors on bond strength. A thiophosphate-type metal primer (M-Primer II) was used in combination with 4-META resin to strengthen the chemical bonding of 4-META resin to the porous alloy surface. The surfaces of the alloy specimen treated by oxidation, pickling, and bonding with 4-META resin were analyzed using an electron probe X-ray micro-analyzer.
Results:
SEM observation showed many resin tags on the resin side of the bond structure after removal of the gold alloy matrix with aqua regia. The bond strength of 4-META resin to the porous alloy surface was 38+/-3 (mean+/-SD) MPa whereas that to a flat alloy surface with the same composition was 19+/-1 MPa. The bond strength of a self-cured resin without 4-META to the porous alloy surface was 24+/-2 MPa.
Significance:
A high bond strength was obtained when 4-META resin was bonded to the porous 14K gold alloy surface treated with M-Primer II.