Related Experiment Video
Updated: Aug 25, 2026

Near-Infrared Temperature Measurement Technique for Water Surrounding an Induction-heated Small Magnetic Sphere
Published on: April 30, 2018
Light emission diode water thermometer: a low-cost and noninvasive strategy for monitoring temperature in aqueous
Sebastián A Thompson1, Francisco J Andrade, Fernando A Iñón
1INQUIMAE-Departamento de Qúimica Inorgánica, Anaĺitica y Qúimica Física-Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires. 3er Piso, Pabellón 2, Ciudad Universitaria. (C1428EHA) Buenos Aires, Argentina.
Abstract:
A spectroscopic device for monitoring the temperature of aqueous solutions is presented. It uses a 950 nm light emission diode as light source and two photodiodes as detectors. Temperature is monitored following the thermally induced absorbance changes of the water-OH second overtone (approximately 960 nm). A linear response between the light absorbed by an aqueous solution and its temperature is found in the range from 15 to 95 degrees C. A prediction error of 0.1 degrees C and a precision of 0.07 degrees C in temperature measurement can be achieved. Up to 0.1 M of electrolyte concentration can be present in the solution without significantly affecting the temperature measurement. Different strategies, such as remote (noninvasive) or in situ (using a fiber-optic probe) temperature measurement, are shown, and their relative advantages are discussed.
Related Concept Videos
Equipments Used to Measure Body Temperature
Glass-bulb Thermometer:
Glass-bulb thermometers are hollow glass tubes with a bulb tip containing liquid such as ethanol or mercury. Historically, glass bulb mercury thermometers were the standard device to measure body temperature. Today, mercury thermometers are prohibited in many countries due to the hazardous effects of mercury and the risk of exposure if the glass bulb breaks. In general,...
UV–Vis Spectrometers

