Related Experiment Video
Updated: Aug 25, 2026

An Atmospheric Pressure Plasma Setup to Investigate the Reactive Species Formation
Published on: November 3, 2016
The analysis of conductive solid samples by r.f. capacitively coupled plasma at atmospheric pressure
S D Anghel1, T Frentiu, A M Rusu
1Physics Department, University of Cluj, 3400, Cluj-Napoca, Romania.
Abstract:
A radiofrequency capacitively coupled plasma (rf CCP) with tip-ring electrode geometry has been used for the analysis of Al, Co, Cr, Cu, Mn, Mo, Ni, and V in low and medium alloyed steel. The sample is used as one of the electrodes of the plasma torch. The influence of plasma power, argon flow rate and distance between the electrodes on the analytical signals has been studied. The limits of detection are in the range of 0.001 to 0.048%. The dynamic range is three orders of magnitude.
More Related Videos
Related Concept Videos
Inductively Coupled Plasma Atomic Emission Spectroscopy: Principle
The ions and electrons produced interact with the fluctuating magnetic field created by a water-cooled...
Inductively Coupled Plasma–Mass Spectrometry (ICP–MS): Overview
Atomic Emission Spectroscopy: Lab
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used.

