Pilot point temperature regulation for thermal lesion control during ultrasound thermal therapy

The fundamental goal of ultrasound thermal therapy is to provide proper thermal lesion formations for effective tumour treatment. The quality of the therapy depends mostly on its positional precision. To date, most ultrasound thermal therapy treatments have focused on the formation of power or temperature patterns. The non-linear and time-delay effects of thermal dose formation prohibit direct control of the thermal dose distribution. In the paper, the control of thermal lesions by regulation of the temperature of a pilot point is proposed. This scheme utilises the high correlation between temperature elevation and thermal dose at the forward boundary of thermal lesions. To verify the feasibility, a 2D ultrasound phased array system was used to generate thermal lesions of various sizes, and the temperature elevation required to generate a thermal dose threshold was investigated. Results showed that the required temperature elevation was found to be a reasonably constant value of 52.5 degrees C under differing conditions when the focal area was small. When the focal area under consideration was large, the required temperature elevation became a monotonic function of blood perfusion rate, ranging from 49.2 to 52.5 degrees C. When the reference temperature of the pilot point was set at a conservative value (52.5 degrees C), the thermal lesions were controlled precisely under a wide range of blood perfusion and power pattern changes, tested by using a more realistic model that takes into account thermal-induced attenuation and blood perfusion changes. This changed the complex thermal dose control problem into a simple temperature regulation problem, which makes implementation of thermal lesion control easier, giving the scheme a high potential for application to current ultrasound thermal therapy systems.