Design considerations on surface acoustic wave resonators with significant internal reflection in interdigital...

This paper discusses, both qualitatively and quantitatively, the operation and the design principle of current surface acoustic wave (SAW) resonators in which the internal reflection within interdigital transducers (IDTs) is not negligible and lower capacitance ratio is necessary. For the purpose, the p-matrix expression is used with the help of the coupling-of-modes theory. The internal reflection causes: deformation of the IDT passband shape, frequency dependence of the effective SAW velocity within IDTs, and suppression of higher-order resonances. It is shown that these features can be effectively used to enhance performances of both one-port SAW resonators and two-port double-mode SAW (DMS) filters. In addition, under proper designs accounting for the internal reflection, most of all structural discontinuities can be removed, and is most preferable for the reduced scattering loss at the discontinuity. Design criteria also are presented for DMS filters of wide bandwidth, and it is demonstrated how device performances are improved by proper design accounting for the criteria.