Related Experiment Video
Updated: Aug 20, 2026

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
Mercury removal from water using activated carbons derived from organic sewage sludge
Fu-Shen Zhang1, Jerome O Nriagu, Hideaki Itoh
1Department of Environmental Health Sciences, School of Public Health, The University of Michigan, Ann Arbor, MI 48109, USA. fszhang@esi.nagoya-u.ac.jp
Abstract:
Various types of activated carbons were developed from organic sewage sludge (SS) using H(2)SO(4), H(3)PO(4) and ZnCl(2) as chemical activation reagents, and the removal of Hg(II) from aqueous solution by these carbons was effectively demonstrated. The quality of the activated carbons was dramatically improved owing to chemical activation. ZnCl(2) activated carbon had the highest capability for Hg(II) adsorption, followed by H(3)PO(4) and H(2)SO(4) activated carbons. The adsorption was greatly affected by Hg(II) concentration, solution pH and carbon dosage, and followed Lagergren first order rate equation and Freundlich isotherm model. Desorption results indicated that around 60% to 80% of the adsorbed Hg(II) could be recovered from the carbons to 0.1 M HNO(3) solution by sonication treatment. Accordingly, it is believed that the activated carbons developed in this study are effective and practical for utilization in industrial wastewater treatment for mercury removal.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
08:34A Dual-Functional Electroactive Filter Towards Simultaneously Sb(III) Oxidation and Sequestration
Published on: December 5, 2019
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Bioremediation of Hydrocarbons
Microbial Wastewater Treatment
Bioremediation
Factors Affecting Solubility
Microbial Bioremediation of Uranium