Related Experiment Video
Updated: Aug 19, 2026
An Anesthesia, Surgery, and Harvest Method for the Evaluation of Transpedicular Screws Using an In Vivo Porcine Lumbar Spine Model
Published on: May 31, 2017
Biomechanical evaluation of an expansive pedicle screw in calf vertebrae
1Department of Orthopaedics, Xijing Hospital, Xi'an 710032, China. leiwei@fmmu.edu.cn
Objective:
To obtain a comprehensive understanding of the effect of the improvement of fixation strength of a newly designed expansive pedicle screw through biomechanical analyses.
Methods:
100 (200 pedicles) fresh calf lumber vertebrae were used. A total of four instrumentation systems were tested including CDH (CD Horizon), USS (Universal Spine System pedicle screw), Tenor (Sofamor Denek) and expansive pedicle screw (EPS). Pullout and turning-back tests were performed to compare the holding strength of the expansive pedicle screw with conventional screws, i.e. USS, CDH and Tenor. Revision tests were performed to evaluate the mechanical properties of the expansive pedicle screw as a "rescue" revision screw. A fatigue simulation using perpendicular load up to 1,500,000 cycles was carried out.
Results:
The turning back torque (Tmax) and pull-out force (Fmax) of EPS were significantly greater than those of USS, Tenor and CDH screws (6.5 mm x 40 mm). In revision tests, the Fmax of both kinds of EPS (6.5 mm x 40 mm; 7.0 mm x 40 mm) were greater than that of CDH, USS and Tenor screws significantly (P<0.05). No screws were broken or bent at the end of fatigue tests.
Conclusions:
EPS can significantly improve the bone purchase and the pull-out strength compared to USS, Tenor and CDH screws with similar dimensions before and after failure simulation. The fatigue characteristic of EPS is similar to that of CDH, USS and Tenor screws.
