Related Experiment Video
Updated: Aug 19, 2026

A Method to Test the Efficacy of Handwashing for the Removal of Emerging Infectious Pathogens
Published on: June 7, 2017
A study of ergonomics factors in washbasin design
1Department of Architecture, Karadeniz technical University, Trabzon, Turkey.
Abstract:
A 4-week UNESCO-sponsored mission to the Department of Architecture, Karadeniz Technical University in Eastern Turkey, gave an opportunity to apply ergonomics techniques to some aspects of that country's domestic washbasin design. The study was intended to provide experience in questionnaire design and administration, in the application of psycho-physical methods, and to highlight the importance of determining user characteristics and preferences with regard to the built environment. A field study elicited information on dimensions and positioning of existing wash-basins and ancillary equipment and the opinions of users as to the suitability of these features in relation to the activities performed. A laboratory study, using an adjustable rig permitting variation in the heights of basin, taps and mirror/shelf, followed. The data obtained on preferred heights of these items led to the conclusions that basin height should be increased to between 95 and 100 cm to satisfy the majority of users; tap height above the basin should be reduced to about 11 cm; the shelf and lower edge of a mirror sited above the basin should be 136 cm above the floor; and a clear space of 110 cm should be available between the front of the basin and a wall or other obstruction. Suggestions on other design aspects of the bathroom, resulting from the study, are discussed.
Related Concept Videos
Handwashing I: Introduction and Types of Equipment
Hand wash basins in clinical areas should have faucets that can be turned on and off without using the hands; that is, they should be non-touch or lever-operated.
Handwashing III: During the Procedure and Post-Procedure Steps
Handwashing II: Pre-procedure and Initial Procedure Steps
The hand washing procedure itself includes the following steps. First, cover cuts, if any, on hands with a waterproof dressing. Cuts and abrasions can become contaminated with bacteria hindering the ability to clean the area thoroughly. In addition, repeated hand washing can worsen an injury. The nails must be short and clean, without nail paint...
Design Example: Designing a Residential Plumbing System
Design Example: Creating a Hydraulic Model of a Dam Spillway
Hand hygiene
Hand washing...