Related Experiment Video
Updated: Aug 19, 2026
Measuring Blood Pressure in Mice using Volume Pressure Recording, a Tail-cuff Method
Published on: May 15, 2009
Bell or diaphragm in the measurement of blood pressure?
Ilkka Kantola1, Risto Vesalainen, Kari Kangassalo
1Department of Medicine, Turku University Central Hospital, Turku, Finland. ilkka.kantola@tyks.fi
Background:
International guidelines have given diverse recommendations as to which side of the stethoscope should be used in the measurement of blood pressure.
Objective:
To determine if there is any difference between the bell and the diaphragm sides of the ordinary acoustic stethoscope in the measurement of blood pressure.
Design And Methods:
We compared, in random order, the bell and the diaphragm side of the ordinary acoustic stethoscope and also the effect of low- and high-frequency amplification with an electronic stethoscope in the measurement of blood pressure, in 250 adults.
Setting:
Department of Medicine, Turku University Central Hospital.
Results:
No statistically significant difference was seen between the bell side and the diaphragm side of the acoustic stethoscope, either in systolic blood pressure (SBP; mean +/- SD 129.5 +/- 21.7 and 129.4 +/- 20.8 mmHg, respectively) or diastolic blood pressure (DBP; 77.0 +/- 12.0 and 77.1 +/- 12.0 mmHg, respectively). Both the low-frequency (130.7 +/- 22.5 mmHg) and the high-frequency (131 +/- 22.2 mmHg) amplification of systolic Korotkoff sounds yielded significantly greater values of SBP than were measured either with the bell (P = 0.008 compared with low frequency, P = 0.0005 compared with high frequency) or the diaphragm (P = 0.004 compared with low frequency, P = 0.0001 compared with high frequency). Low-frequency amplification of DBP (76.4 +/- 12.3 mmHg) yielded values significantly lower than those measured with the bell (P = 0.04) or the diaphragm (P = 0.01). Values from high-frequency amplification of DBP (77.2 +/- 12.3 mmHg) did not differ significantly from those measured with the acoustic stethoscope.
Conclusions:
Both sides of the acoustic stethoscope give similar results in the measurement of office blood pressure and either side can be used in the reliable measurement of blood pressure.
Related Concept Videos
01:17Measurement of Blood Pressure
01:30Equipments Used To Measure Blood Pressure
This invasive approach involves cannulating a peripheral artery. During each cardiac contraction, pressure generates mechanical motion within the catheter, transmitted through rigid, fluid-filled tubing to a transducer. This transducer converts mechanical motion into electrical signals displayed as waveforms on a monitor. An automatic flushing system prevents blood backflow. Due to the potential risk of unexpected arterial blood loss, this method is primarily used in intensive...
01:21Sites for measuring blood pressure
The Brachial Artery: Primary Site for Blood Pressure Measurement
01:23Assessment of blood pressure in brachial artery(two-step method)
01:28Special considerations while measuring blood pressure
Monitoring Both Arms:
Monitoring BP in both arms during the initial assessment is advisable, as the systolic value may differ by five to ten mm Hg between arms. For subsequent BP assessments, use the arm with the higher reading.
01:15Assessment of blood pressure in brachial artery(one-step method)
Prepare for the Procedure: