Related Experiment Video
Updated: Aug 19, 2026

A Rapid Method for Modeling a Variable Cycle Engine
Published on: August 13, 2019
A study of active tonal noise control for a small axial flow fan
1Department of Mechanical Engineering, The Hong Kong Polytechnic University, Kowloon, Hong Kong.
Abstract:
Sound radiated by a computer cooling fan consists of tones which are phase locked with the rotation, and other less deterministic tones and broadband random noise. This paper demonstrates the feasibility of globally eliminating the rotation-locked tones by applying a very simple destructive interference to a modified cooling fan with the number of struts equal to the number of rotor blades. The rig consists of a miniature electret microphone used as a rotation sensor, an ordinary loudspeaker, and a bandpass filter with adjustable amplitude and phase delay. The microphone is located at the inlet bellmouth of the fan to pick up the fluctuating aerodynamic pressure caused by the passing rotor blades. The pressure spectrum is rich in the blade passing frequency (BPF) and its low-order harmonics. It provides much better performance than a pulse-generating tachometer. Analysis of the original fan noise shows that about 90% of the radiated tonal sound is phase locked with rotation, and this portion is almost completely eliminated in all directions. The reductions of the radiated sound power in the first two BPFs are 18.5 and 13.0 dB, respectively, and the overall sound power reduction is 11.0 dB.
More Related Videos
12:26Fabrication, Operation and Flow Visualization in Surface-acoustic-wave-driven Acoustic-counterflow Microfluidics
Published on: August 27, 2013
08:32Assembly and Characterization of an External Driver for the Generation of Sub-Kilohertz Oscillatory Flow in Microchannels
Published on: January 28, 2022
Related Concept Videos
Frequency-Domain Interpretation of PD Control
The proportional control gain, combined with the system's...
Steady, Laminar Flow Between Parallel Plates
Steady, Laminar Flow in Circular Tubes
Control of Power Flow
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Laminar and Turbulent Flow