Photopolymerization of developmental monomers for dental cationically initiated matrix resins

The objectives were to investigate the structure and selected physical properties of products resulting from the photopolymerization of a binary mixture containing an aliphatic dioxirane, 3,4-epoxycyclohexylmethyl-3,4-epoxycyclohexane carboxylate (ECHM-ECHC) and a potential expanding monomer, 3,9-bis(oxiranylcyclohexylmethyl)-1,5,7,11-tetraoxaspiro[5.5]undecane (BOCHM-TOSU).

Reaction mixtures were irradiated with a dental curing lamp at room temperature. Some reactions were quenched prior to gel point. Oligomeric products were separated from unreacted monomers by column chromatography, and analyzed by NMR. Physical properties of polymeric solids were measured using accepted standard methods. Protonation energies for monomers were calculated using semi-empirical quantum mechanical methods.

Types of oligomers found included poly(ether)s and poly(carbonate)s. Quantum mechanical calculations indicated preferential attack at the more nucleophilic oxaspirocyclic ring sites. For cured solid polymer samples, the elastic modulus was 2.39 +/- 0.24 GPa and the fracture toughness was 0.73 +/- 0.10 MPa m(1/2). These values were similar to those measured for a cured conventional BISGMA/TEGDMA matrix resin.

The room-temperature photopolymerization of an aliphatic dioxirane and a potential expanding monomer demonstrates the possibility of making cross-linked copolymer resins with improved polymerization shrinkage characteristics for use in dental composites.