Related Experiment Video
Updated: Aug 18, 2026
Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
Activated carbon from char obtained from vacuum pyrolysis of teak sawdust: pore structure development and
S Ismadji1, Y Sudaryanto, S B Hartono
1Department of Chemical Engineering, Widya Mandala Catholic University, Kalijudan 37, Surabaya 60114, Indonesia. suryadi@mail.wima.ac.id
Abstract:
The preparation of activated carbon from vacuum pyrolysis char of teak sawdust was studied and the results are presented in this paper. The effects of process variables such as temperature and activation time on the pore structure of activated carbons were studied. The activated carbon prepared from char obtained by vacuum pyrolysis has higher surface area and pore volume than that from atmospheric pyrolysis char. The BET surface area and pore volume of activated carbon prepared from vacuum pyrolysis char were 1150 m2/g and 0.43 cm3/g, respectively.
