Related Experiment Video
Updated: Aug 17, 2026

Glass-Based Devices to Generate Drops and Emulsions
Published on: April 5, 2022
Discharge of lubricant from air turbine handpieces
A S M Pong1, J E Dyson, B W Darvell
1Oral Rehabilitation, Faculty of Dentistry, The University of Hong Kong, Hong Kong.
Objective:
To demonstrate and quantify the discharge of lubricating oil from high-speed air turbine handpieces whilst running.
Materials And Methods:
Dye-marked oil (Kavospray, KaVo) was used to lubricate four handpieces (Quiet-Air, Midwest) and the air discharged from around the lower bearing was directed at the moving chart paper on a recorder whilst running for 40 minutes. Secondly, seven new handpieces (Quiet-Air, 300SE, Midwest; Topair 796, Topair 795, W+H; VIP-Sigma, Pana-air, NSK; Lares, Lares Research) were cleaned, weighed and then lubricated with unmarked oil (Kavospray, KaVo). Oil discharge was determined gravimetrically over runs of 240 minutes. Data were fitted to the logistic dose response function.
Result:
The dye-marked oil tests showed that oil was discharged for at least 40 minutes in the direction of the bur. The gravimetric tests showed that oil continued to be discharged up to at least 240 minutes, and that the usual practice of removing excess lubricant by running for 1-2 minutes was ineffective in preventing cut-surface contamination.
Significance:
Bonding procedures in dentistry may be jeopardised by oil contamination from handpiece lubricants. Decontamination with a detergent is suggested as a means of ensuring effective adhesive dentistry.
Related Concept Videos
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular velocity...
Suctioning the Oropharyngeal Airway
After assembling the equipment, the nurse should practice hand hygiene and don appropriate PPE according to infection control guidelines to avoid the...
Tracheostomy Suctioning II: Procedure
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Tracheostomy Suctioning I: Pre-Procedural Steps
Equipment Required
First, gather all necessary equipment: a sterile suction catheter, a sterile disposable container, sterile gloves, a towel or...
Suctioning the Nasopharyngeal Airway
Equipment Required

