Related Experiment Video
Updated: Aug 17, 2026

Preparation of Zinc Oxide Nanoparticles and the Evaluation of their Antibacterial Effects
Published on: September 27, 2024
Influence of the reactant concentrations on the synthesis of ZnO nanoparticles
Zeshan Hu1, José F Herrera Santos, Gerko Oskam
1Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.
Abstract:
We report on the synthesis of ZnO nanoparticles from Zn(CH3CO2)2 and NaOH in 2-propanol. Nucleation and growth are fast, and hence at longer times the particle size is controlled by coarsening. The coarsening kinetics are independent of the Zn(CH3CO2)2 concentration between 0.5 and 1.25 mM at a fixed [Zn(CH3CO2)2]:[NaOH] ratio of 0.625. The width of the size distribution was found to increase only slightly with aging time. In addition, at a fixed Zn(CH3CO2)2 concentration of 1 mM, the kinetics are independent of the [Zn(CH3CO2)2]:[NaOH] ratio between 0.476 and 0.625. The presence of water in the reaction mixture was found to only slightly affect the coarsening kinetics for water contents larger than about 20 mM. For lower water concentrations, the nucleation and growth of ZnO were very slow. It can be concluded that the synthesis method described provides a reliable source of ZnO nanoparticles due to its insensitivity to the reactant concentrations and the presence of water.
More Related Videos
Related Concept Videos
Concentration and Rate Law
For example, in a generic reaction aA + bB ⟶ products, where a and b are stoichiometric coefficients, the rate law can be written as:
Radical Reactivity: Concentration Effects
Ziegler–Natta Chain-Growth Polymerization: Overview
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...

