Related Experiment Video
Updated: Aug 17, 2026

Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for Cu(II) Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
A study of the static and dynamic adsorption of Zn(II) ions on carbon materials from aqueous solutions
Miguel A Alvarez-Merino1, Victoria López-Ramón, Carlos Moreno-Castilla
1Departamento de Química Inorgánica y Orgánica, Facultad de Ciencias Experimentales, Universidad de Jaén, 23071 Jaén, Spain.
Abstract:
The effect of surface oxidation, solution pH, and ionic strength on the adsorption of Zn(II) ions from aqueous solution under static conditions was studied using commercial activated carbons in the form of grains and cloth. In addition, the effects of surface oxidation and the presence of dissolved natural organic matter (tannic acid) were studied under dynamic conditions using activated carbon cloth column beds. Under static conditions, surface oxidation largely increased Zn2+ uptake and two H+ ions were displaced from the oxidized carbon surface per Zn(II) ion adsorbed. It is proposed that adsorption of Zn(II) on the as-received basic carbons was due to C(pi)-cation interactions. An increase in solution pH in the range 3-6 increased Zn(II) uptake, whereas an increase in ionic strength decreased Zn(II) uptake because of the screening effect of the added salt. In the experiments carried out with carbon column beds, the oxidized activated carbon cloth was also more effective than the as-received carbon to remove Zn(II) ions. In this case, the presence of tannic acid decreased the efficiency of the oxidized activated carbon cloth bed to remove Zn(II) ions. An increase in the tannic acid initial concentration had a greater effect on the removal of tannic acid than on the removal of Zn(II) by the column bed. This may be a consequence of the greater size of tannic acid molecules and their low affinity for oxidized carbon surfaces.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
09:46Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5
Published on: August 25, 2016
Related Concept Videos
Adsorption Isotherms I
Adsorption Isotherms II
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Adsorption of Gases on Solids
Extraction: Advanced Methods
Electrochemical Systems