Investigation of the uptake ability of fly ashes produced after lignite combustion

Fly ash samples from the five steam electric power stations of the Lignite Center of Western Macedonia were used in this study. They consisted mainly of anhydrite, lime, quartz and amorphous material as well as feldspars, calcite, micas + clays, portlandite and gehlenite which were all present in minor amounts. Anhydrite, lime and portlandite in the fly ash samples diminished upon treatment with ammonium acetate aqueous solution, whereas quartz, feldspars, gehlenite and amorphous material were enriched. The uptake ability of the fly ash samples ranged from 89 to 101 mequ./100g. The uptake ability of the samples was mainly attributed to the amorphous material and the microporous minerals, micas + clays. The amorphous material content was estimated at between 17 and 20 wt% in the treated fly ashes and may be unburned organic matter and amorphous inorganic material that resulted during the combustion of the lignite. A positive correlation was observed between the uptake ability and the total percentage of amorphous material and micas + clays. The relatively high uptake ability of the fly ash samples could lead to additional industrial and environmental uses of the fly ashes. The environmental advantage of fly ash exploitation will be particularly important for large electric power centers, such as the LCWM.