Influence of deposition parameters on chemical properties of calcium phosphate coatings prepared by using...

The electrostatic spray deposition (ESD) technique offers the possibility of depositing calcium phosphate (CaP) coatings onto various substrate materials with defined chemical and morphological properties. The relationship between physical, apparatus-related deposition parameters, and the chemical characteristics of ESD coatings was investigated by means of X-ray diffraction, Fourier transform infrared spectroscopy, and energy dispersive spectroscopy to be able to deposit CaP coatings with tailored chemical properties. The results showed that the chemical characteristics of CaP coatings, deposited with use of the ESD technique, were strongly dependent on the deposition temperature, the nozzle-to-substrate distance, the liquid flow rate, and the geometry of the spraying nozzle. By investigating the influence of the deposition temperature, information could be obtained on the formation mechanism of CaP coatings-and specifically the biologically interesting carbonate apatite phase-using the ESD technique. CaP coatings were not formed merely because of solvent evaporation; a chemical reaction was needed to synthesize the coatings. This reaction involved thermal decomposition of the organic solvent butyl carbitol into carbonate ions via formation of intermediate oxalate ions. The amount of carbonate incorporation, and consequently, the Ca/P ratios of the deposited coatings, was shown 1) to decrease with increasing nozzle-to-substrate distance, 2) to decrease with increasing liquid flow rate, and 3) to decrease by making use of a novel two-component nozzle geometry.