Related Experiment Video
Updated: Aug 17, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Evaluation of electrokinetic removal of heavy metals from sewage sludge
Jing-Yuan Wang1, Di-Song Zhang, Olena Stabnikova
1School of Civil and Environmental Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore.
Abstract:
The presence of heavy metals is one of the main obstacles for agricultural use of million tonnes of dewatered sewage sludge produced in wastewater treatment plants. Electrokinetic (EK) treatment can be applied to remove heavy metals from sludge. The aim of this study was to increase the efficiency of electrokinetic removal of heavy metals from dewatered sewage sludge. EK experiments were carried out with and without pH adjustment in cathode chamber of acidified sewage sludge. The selective sequential extraction (SSE) was used to determine the fractionation of heavy metals in sewage sludge. The mobility of heavy metals in sludge significantly increased after its acidification at pH 2.7 and followed the order: Ni, Zn, Cu, As, Cr, Pb. Removal efficiencies of heavy metals in the experiment with acidified sewage sludge and pH adjustment at cathode chamber at 2.0 were: 95% for Zn, 96% for Cu, 90% for Ni, 68% for Cr, 31% for As and 19% for Pb. The concentrations of Zn, Cu, Ni, Cr and Pb after EK treatment were below the United States Environmental Protection Agency limits for biosolids applied to agricultural land, forest, public contact sites or reclamation sites.
More Related Videos
09:49Use of a Battery of Chemical and Ecotoxicological Methods for the Assessment of the Efficacy of Wastewater Treatment Processes to Remove Estrogenic Potency
Published on: September 11, 2016
08:34A Dual-Functional Electroactive Filter Towards Simultaneously Sb(III) Oxidation and Sequestration
Published on: December 5, 2019
Related Concept Videos
Biological Treatment of Effluent and Waste Water
Microbial Leaching
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Electrogravimetric Analysis: Overview
To test the completeness of the...
Electrodeposition
Electrodeposition can...
Microbial Wastewater Treatment