Variations of particle size and bed voidage distributions in expanded bed during transient operation processes

Changes in bed expansion are frequently encountered during an expanded bed adsorption, such as during the initial bed expansion, feed loading and washing processes. We have here studied the changes of local particle size distribution and bed voidage of an expanded bed in the initial bed expansion process as well as those during the changes in mobile phase viscosity, which imitated feed loading and column washing processes. Using a glass column modified with three side sampling ports and Streamline AC as the solid phase, experimental measurements on a series of operation moments during the transient processes were carried out by sampling the particles from within the column at different axial positions. In the initial bed expansion process, the gradual formation of an axial classification from a settled bed to a stable expanded bed was first displayed. By changing the mobile phase from water to 10% (w/w) glycerol solution or vice versa, the variations in both the particle size distribution and bed voidage corresponding to the increase or decrease of the bed height caused by the changes of the mobile phase viscosity were examined as well. The transient changes of the local particle size distribution and bed voidage first occurred in the bed bottom and then progressed from bottom to top along the axial direction. However, the changes of bed voidage at different axial positions were not unidirectional. That is, by changing the mobile phase to the high-viscosity glycerol solution, a constant increase of the bed voidage was observed in the bed bottom, while a distinct decrease of the bed voidage before its increase was involved at the middle and top positions. This is ascribed to the compression effect caused by the upward movement of the lower part particles.