Determination of aromatic hydrocarbons in gasolines by flow modulated comprehensive two-dimensional gas
John W Diehl1, Frank P Di Sanzo
1ExxonMobil Research and Engineering, Corporate Strategic Research, Analytical Sciences Laboratory, Paulsboro Technical Center, Paulsboro, NJ 08066, USA. john.w.diehl@exxonmobil.com
Abstract:
Valve based/flow modulated comprehensive two-dimensional gas chromatography-flame ionization detection (GC x GC-FID) was used for quantification of C6 through C12 aromatic hydrocarbons by carbon number in gasolines. A 0.53 mm i.d. non-polar first dimension column was coupled to a 0.53 mm i.d. polar second dimension column through a double loop eight port valve modulator. Depending on the sample type, normalized percent and internal standard (I.S.) quantification was performed. For normalized percent quantification, a one-point calibration performed with one aromatic compound per carbon number/class provided an average % accuracy of 2.1% and a short-term n--1 relative standard deviation of 1.0%. For total aromatic compounds good agreement with the more complex conventional multidimensional GC technique was obtained. However, GC x GC has certain advantages over most other methods, mainly increased selectivity for total and carbon number aromatic content. The identification of the aromatic hydrocarbons was confirmed by GC x GC-MS.
Related Concept Videos
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...


