Related Experiment Video
Updated: Aug 16, 2026
Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
Wear of resin denture teeth by two-body contact
Thomas Stober1, Tanja Lutz, Herbert Gilde
1Department of Prosthodontics, Ruprecht-Karls-Universität Heidelberg, Poliklinik für Zahnärztliche Prothetik'Im Neuenheimer Field 400, D-69120 Heidelberg, Germany. thomas_stober@med.uni-heidelberg.de
Objectives:
The objective of this study was to examine the two-body wear resistance of nine different resin denture teeth and one experimental material.
Methods:
The two-body wear test was performed in a chewing simulator with an antagonistic Al(2)O(3) ball under an axial load of 40 N for 100,000 cycles. In each test series, an enamel sample was included as a reference. The wear was determined with an optical 3D surface profilometer. For statistical evaluation, SPSS for Windows was used.
Results:
The samples of Artiplus (18.7-SD 21.0) and e-Ha (21.2-SD 15.1) showed the lowest volumetric wear (in mm(3)x10(-3)) after 100,000 cycles. The difference from the other materials tested, except NC Veracia Posterior, was statistically significant (p=0.001-0.037). SR-Postaris-DCL (55.0-SD 6.8), SR-Orthosit-PE (61.1-SD 12.4) and Vitapan (72.1-SD 15.9) exhibited medium-sized wear values with low dispersion, whereas Orthognat (80.1-SD 31.6), Premium 8 (84.6-SD 31.4), NC Veracia Posterior (87.0-SD 52.7), SR-Orthotyp-PE (114.6-SD 28.0) and Trubyte Portrait (123.0-SD 45.6) showed high wear values with great variations. Statistically provable differences were found between SR-Orthotyp-PE and SR-Postaris-DCL (p=0.019) and also between SR-Orthotyp-PE and SR-Orthosit-PE (p=0.031). For enamel, a medium-sized wear value of 66.1-SD 76.8 was determined.
Significance:
The denture teeth examined showed differences in two-body wear resistance. The wear values determined were in some cases higher and in others lower than those of natural enamel. A definite connection between the wear resistance and the chemical composition of the materials could not be found in this investigation.
