Twin comprehensive two-dimensional gas chromatographic system: concept and applications
Related Experiment Video
Updated: Aug 16, 2026

Chromatographic Fingerprinting by Template Matching for Data Collected by Comprehensive Two-Dimensional Gas Chromatography
Published on: September 2, 2020
Mohamed Adahchour1, Eric Jover, Jan Beens
1Department of Analytical Chemistry and Applied Spectroscopy, Vrije Universiteit, de Boelelaan 1083, 1081 HVAmsterdam, The Netherlands. M.Adahchour@few.vu.nl
Abstract:
A twin GC x GC system has been designed which enables the analysis of a sample by means of two different and independent column combinations simultaneously. Both combinations are incorporated in the same oven, using the same temperature programme, and are fed using a 50:50 column-entrance-split. It is demonstrated that, employing combinations of a conventional non-polar x polar and a reversed-type polar x non-polar column set, the information content is as high, and the analytical performance is as good as when using two separate GC x GC systems. That is, there is an appreciable gain of time and a reduction of costs without any loss of quality. The general usefulness of performing, and comparing two mutually different GC x GC runs is further illustrated with FAMEs in olive oil, and pollutants in a sediment sample.
More Related Videos
11:44Qualitative Characterization of the Aqueous Fraction from Hydrothermal Liquefaction of Algae Using 2D Gas Chromatography with Time-of-flight Mass Spectrometry
Published on: March 6, 2016
08:37Measurement of H2S in Crude Oil and Crude Oil Headspace Using Multidimensional Gas Chromatography, Deans Switching and Sulfur-selective Detection
Published on: December 10, 2015
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall. The coating...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a column.
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...