Related Experiment Video
Updated: Aug 14, 2026

Prescribed 3-D Direct Writing of Suspended Micron/Sub-micron Scale Fiber Structures via a Robotic Dispensing System
Published on: June 12, 2015
Molecular weight effect on latex film formation induced by solvent vapor: an optical transmission study
1Department of Physics, Istanbul Technical University, Maslak, Istanbul, 80626, Turkey.
Abstract:
Two different sets of powder latex film were prepared from high- and low-molecular-weight (HM and LM) poly(methyl methacrylate) (PMMA). The optical transmission method was used to the study film formation induced by organic vapor. Various HM and LM films with the same latex content were prepared separately from the PMMA particles and exposed to vapor of a chloroform-heptane mixture in various volume percents of chloroform. Transmitted light intensities, I(tr), from these films increased in time under vapor exposure, which was attributed to the increase in "crossing density" at the junction surface. The Prager-Tirrell model was employed to obtain the back-and-forth frequency, nu, of the reptating polymer chain during film formation induced by solvent vapor. nu values were obtained and found to be strongly correlated with the percent of chloroform in the solvent mixture and the molecular weight of the polymer chain. It is observed that high-molecular-weight chains reptate much more slowerly than low-molecular-weight chains.
Related Concept Videos
Determination of Molar Masses of Polymers II
Polymers: Molecular Weight Distribution
Polymers: Defining Molecular Weight
The number average molecular weight (Mn) is the summation of the number...
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Determination of Molar Masses of Polymers I
Volatilization

