A new device for evaluating distance and directional performance of golf putters

The purpose of this study was to construct and evaluate the reliability of an apparatus for testing golf putters with respect to distance and direction deviation at different impact points on the clubface. An apparatus was constructed based on the pendulum principle that allowed putter golf clubs to swing at different speeds. The mean speed of the club head before ball impact, and of the ball after impact, was calculated from time measurements with photocells. A pin profile rig was used to determine the directional deviation of the golf ball. Three different putters were used in the study, two that are commercially available (toe-heel weighted and mallet types) and one specially made (wing-type) putter. The points of impact were the sweet spot (as indicated by the manufacturer's aim line), and 1, 2 and 3 cm to the left and right of the sweet spot. Calculation of club head speed before impact, and of ball speed after impact (proportional to distance), showed errors < or = 0.5% of interval duration. The variability in ball impacts was tested by measuring time and direction deviations during 50 impacts on the same ball. The mean duration (+/- s) after ball impact in the test interval (1.16 m long) was 206 (0.8) ms and the standard deviation in the perpendicular spreading of the balls in relation to the direction of the test interval was 0.005 m. A test-retest of one putter on two consecutive days after remounting of the putter on the test apparatus showed less than 1% difference in distance deviation. We conclude that the test apparatus enables a precise recording of distance and direction deviation in golf putters as well as comparisons between different putters. The apparatus and set-up can be used in the laboratory as well as outdoors on the putting green.