Related Experiment Video
Updated: Aug 13, 2026

20 mJ, 1 ps Yb:YAG Thin-disk Regenerative Amplifier
Published on: July 12, 2017
Interface engineered ultrashort period Cr-Ti multilayers as high reflectance mirrors and polarizers for soft x rays
Naureen Ghafoor1, Per O A Persson, Jens Birch
1Department of Physics, Materials Science, Thin Film Physics Division, Linköping University, 581 83 Linköping, Sweden. naugh@ifm.liu.se
Abstract:
Cr-Ti multilayers with ultrashort periods of 1.39-2.04 nm have been grown for the first time as highly reflective, soft-x-ray multilayer, near-normal incidence mirrors for transition radiation and Cherenkov radiation x-ray sources based on the Ti-2p absorption edge at E = 452 eV (lambda = 2.74 nm). Hard, as well as soft, x-ay reflectivity and transmission electron microscopy were used to characterize the nanostructure of the mirrors. To achieve minimal accumulated roughness, improved interface flatness, and to avoid intermixing at the interfaces, each individual layer was engineered by use of a two-stage ion assistance process during magnetron sputter deposition: The first 0.3 nm of each Ti and Cr layer was grown without ion assistance, and the remaining 0.39-0.72 nm of the layers were grown with high ion-neutral flux ratios phi (phiTi = 3.3, phiCr = 2.2) and a low energy Eion (ETi = 23.7 and ECr = 21.2), ion assistance. A maximum soft-x-ray reflectivity of R = 2.1% at near-normal incidence (approximately 78.8 degrees) was achieved for a multilayer mirror containing 100 bilayers with a modulation period of 1.379 nm and a layer thickness ratio of tau = 0.5. For a polarizing multilayer mirror with 150 bilayers designed for operation at the Brewster angle, 45 degrees, an extinction ratio, Rs/Rp, of 266 was achieved with an absolute reflectivity of R = 4.3%.
