Related Experiment Video
Updated: Jul 31, 2026

Analyzing Large Protein Complexes by Structural Mass Spectrometry
Published on: June 20, 2010
Determination of calcium in complex samples using functional magnetic beads combined with electrodeless/sheathless
1Department of Applied Chemistry, National Chiao Tung University, Hsinchu 300, Taiwan.
Abstract:
Conventionally, electrospray ionization ion trap mass spectrometry (ESI-ITMS) is not used for the analysis of metal ions because metal ions may be of too low mass to be trapped by the mass analyzer. Furthermore, metal ions can easily precipitate during ESI processes because of their poor volatilities. We present an approach for solving these two problems using milk as the sample to demonstrate the feasibility of using ESI-ITMS as the detection method for metal ions. Iron oxide magnetic beads with nitrilotriacetic acid (NTA) immobilized on their surface were used as affinity probes for calcium ions from dairy drinks. Ethylenediaminetetraacetic acid (EDTA) was used for the elution of the metal ions chelated by NTA on the beads. The EDTA eluent was analyzed by electrodeless/sheathless ESI-ITMS. The use of functional magnetic beads to trap metal ions from complex samples can effectively reduce the interference from sample matrix. Using the EDTA eluent as the sample avoids the problem of the low volatility of metal ions during ESI-ITMS analysis. This method gives measurements of calcium ions in dairy drinks quantitatively very close to the true values (<4% error).
More Related Videos
Related Concept Videos
Qualitative Analysis
For instance, group IV...
Electrospray Ionization (ESI) Mass Spectrometry
ESI utilizes electrical energy to transfer ions from the liquid phase of the sample into the...
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Inductively Coupled Plasma–Mass Spectrometry (ICP–MS): Overview

