Acidity constants in different media (I=0 and I=0.1 M KCl) from the uncertainty perspective

Procedures for estimating the measurement uncertainty for the acidity constant Ka (or the pKa value) in different media (I=0 and I=0.1 mol L(-1) KCl), as determined by potentiometric titration, are presented. The uncertainty budgets (the relative contributions of the different input quantities to the uncertainty in the result) of the pKa (I=0) and pKa (I=0.1 mol L(-1) KCl) values are compared. Unlike the values themselves, the uncertainties and uncertainty budgets of the values are comparable. The uncertainty estimation procedures are based on mathematical models of pKa measurement and involve the identification and quantification of individual uncertainty sources according to the ISO GUM approach. The mathematical model involves 52 and 48 input parameters for pKa (I=0) and pKa (I=0.1 mol L(-1) KCl), respectively. The relative importance of each source of uncertainty is discussed. In both cases, the main contributors to the uncertainty budget are the uncertainty components due to the hydrogen ion concentration/activity measurement, which provide 63.7% (for pKa (I=0)) and 89.3% (for pKa (I=0.1 mol L(-1) KCl)) of the uncertainty. The remaining uncertainty contributions arise mostly from the limited purity of the acid. From this work, it is clear that the uncertainties of the pKa (I=0.1 mol L(-1) KCl) values tend to be lower than those of the pKa (I=0) values. The main reasons for this are that: (1) the uncertainty due to the residual liquid junction potential is nominally absent in the case of pKa (I=0.1 mol L(-1) KCl) due to the similarly high concentrations of background electrolyte in the calibration solutions and measured solution; (2) the electrode system is more stable in solutions containing the 0.1 mol L(-1) KCl background electrolyte and so the readings obtained in these solutions are more stable.