Related Experiment Video
Updated: Aug 7, 2026

Enhanced Oil Recovery using a Combination of Biosurfactants
Published on: June 3, 2022
Enhanced reductive dechlorination in columns treated with edible oil emulsion
Cameron M Long1, Robert C Borden
1North Carolina State University Campus Box 7908, Raleigh, NC 27695, USA.
Abstract:
The effect of edible oil emulsion treatment on enhanced reductive dechlorination was evaluated in a 14 month laboratory column study. Experimental treatments included: (1) emulsified soybean oil and dilute HCl to inhibit biological activity; (2) emulsified oil only; (3) emulsified oil and anaerobic digester sludge; and (4) continuously feeding soluble substrate. A single application of emulsified oil was effective in generating strongly reducing, anaerobic conditions for over 14 months. PCE was rapidly reduced to cis-DCE in all three live columns. Bioaugmentation with a halorespiring enrichment culture resulted in complete dechlorination of PCE to ethene in the soluble substrate column (yeast extract and lactate). However, an additional treatment with a pulse of yeast extract and bioaugmentation culture was required to stimulate complete dechlorination in the emulsion treated columns. Once the dechlorinating population was established, the emulsion only column degraded PCE from 90-120 microM to below detection with concurrent ethene production in a 33 day contact time. The lower biodegradation rates in the emulsion treated columns compared to the soluble substrate column suggest that emulsified oil barriers may require a somewhat longer contact time for effective treatment. In the HCl inhibited column, partitioning of PCE to the retained oil substantially delayed PCE breakthrough. However, reduction of PCE to more soluble degradation products (cis-DCE, VC and ethene) greatly reduced the impact of oil-water partitioning in live columns. There was only a small decline in the hydraulic conductivity (K) of column #1 (low pH+emulsion, K(final)/K(initial)=0.57) and column #2 (live+emulsion, K(final)/K(initial)=0.73) indicating emulsion injection did not result in appreciable clogging of the clayey sand. However, K loss was greater in column #3 (sludge+emulsion, K(final)/K(initial)=0.12) and column #4 (soluble substrate, K(final)/K(initial)=0.03) indicating clogging due to biomass and/or gas production can be significant.
More Related Videos
09:10Experimental Protocol for Biodiesel Production with Isolation of Alkenones as Coproducts from Commercial Isochrysis Algal Biomass
Published on: June 24, 2016
15:19Development of Sulfidogenic Sludge from Marine Sediments and Trichloroethylene Reduction in an Upflow Anaerobic Sludge Blanket Reactor
Published on: October 15, 2015
Related Concept Videos
Microbial Bioremediation of Hydrocarbons
Microbial Bioremediation of Pesticides
Bioremediation
Extraction: Advanced Methods