A test method for the evaluation of protective glove materials used in agricultural pesticide operations

The ASTM Standard Test Method for Resistance of Protective Clothing Materials to Permeation by Liquids and Gases (F 739-85) and the recommended permeation cell have been modified to permit the testing of protective clothing materials for permeation by the low volatility, low water solubility active ingredients present in many pesticide formulations. The modification makes use of solid collection medium, a thin (0.02-in. thick) sheet of silicone rubber, to collect permeants. Those compounds permeating the protective material can then be desorbed into an appropriate solvent and analyzed using conventional methods and instruments. A series of permeation tests have been conducted using samples of 10 common, commercially available protective glove materials and the modified cell. Permeation of the active ingredient as well as carrier solvent components of several concentrated pesticide formulations containing low volatility, low water solubility active ingredients and aromatic hydrocarbon carrier solvents has been monitored. The relative breakthrough and the total mass of material permeating the glove materials appears to be strongly related to the concentration of the aromatic carrier solvent present in the formulations studied to date. The collection method was found to be less useful for monitoring the permeation of active ingredients, which have reasonably high water solubilities. The results obtained by using this method with samples of protective glove materials challenged by several concentrated pesticide formulations are described. For these formulations containing xylene boiling range aromatic solvents, gloves made of nitrile rubber, butyl rubber, and Silver Shield were most resistant to permeation; natural rubber and polyethylene glove materials were least resistant.