Related Experiment Video
Updated: Jul 18, 2026

Rapid Mix Preparation of Bioinspired Nanoscale Hydroxyapatite for Biomedical Applications
Published on: February 23, 2017
Chemical analysis of silica doped hydroxyapatite biomaterials consolidated by a spark plasma sintering method
1School of Mechanical and Aerospace Engineering, Nanyang Technological University, 50 Nanyang Avenue, Singapore 639798, Singapore. jlxu@ntu.edu.sg
Abstract:
Silica (SiO(2)) and the silicate-based biomaterials play an important role due to their in vitro and in vivo biological response. The present study synthesized a novel nano-structured amorphous silica doped hydroxyapatite (HA) via an aqueous precipitation route. HA was prepared with 0, 1, 3 and 5 wt% silica, which are comparable to the measured silicon content of natural bone. After spray drying into micron sized powders, the silica doped HA (SiHA) powders were consolidated at 1000 degrees C with a dwell time of 3 min using a spark plasma sintering (SPS) technique. X-ray diffraction analysis showed a main apatite phase with minor secondary beta-tricalcium phosphate (beta-TCP) was observed in the as-consolidated SiHA compacts. Substitution of PO(4)(3-) by SiO(4)(4-) in the apatite structure resulting in a small increase in the lattice parameters in both a-axis and c-axis of the unit cell were identified by X-ray photoelectron spectrometer (XPS) analysis and Raman spectrometer investigation. The cell culture in vitro investigation demonstrated that the presence of silicon in the SPS consolidated compacts contributed to the relatively high cell proliferation ability when compared with phase pure HA.
Related Concept Videos
Sample Preparation for Analysis: Advanced Techniques
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Washing, Drying, and Ignition of Precipitates

