Dye wastewater treated by Fenton process with ferrous ions electrolytically generated from iron-containing sludge
Chi-Wang Li1, Yi-Ming Chen, Yi-Cheng Chiou
1Department of Water Resources and Environmental Engineering, TamKang University, 151 Ying-Chuan Road, Tamsui 25137, Taipei Hsien, Taiwan. chiwang@mail.tku.edu.tw
Abstract:
Fenton process was employed to treat synthetic dye wastewater with supply of Fe(II) electrolytically generated from iron-containing sludge which was recycled and reused throughout the study. Treated water quality and properties of iron sludge after being repeatedly used were reported and discussed. Experimental results showed that COD was mainly removed by oxidation other than coagulation. Although, the process was quite effective for COD and color removal, conductivity of treated water was enormously high. Meanwhile, repeated use of iron-containing sludge results in accumulation of organic materials embedded in the sludge as indicated by increasing volatile suspended solid (VSS)/TSS ratio and decreasing zeta potential.
Related Concept Videos
Acid Mine Drainage
Microbial Leaching
Biological Treatment of Effluent and Waste Water
Microbes and Other Elemental Cycles
Factors Affecting Solubility
Coagulation


