Related Experiment Video
Updated: Jul 18, 2026

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
Nickel, lead and zinc removal by adsorption process in fluidised bed
E M Homem1, M G A Vieira, M L Gimenes
1State University of Campinas, School of Chemical Engineering, Cidade Universitária Zeferino Vaz, C. P. 6066, CEP: 13083-970, Campinas SP, Brazil.
Abstract:
This work presents an experimental study of nickel (II), lead (II) and zinc (II) metallic ions removal by adsorption in zeolite Baylith WE984. The experiments were conducted in a fluidised-bed rig with 300 grams of zeolite particles having diameter in the range 1 - 4mm. The volumetric flow rate of the fluidizing solution was 4.1 lmin(-1). Metal concentrations in the solution were measured by atomic absorption and the breakthrough curves were obtained for concentrations of metals ranging from 5 to 30 ppm (pH= 2). Experimental results obtained were fitted to the Renken model for analysis of the mass transfer resistance and the kinetic of adsorption. It was verified that the kinetic of adsorption was the limiting factor for the metallic ion retention in fluidised bed. Competitiveness of the metals adsorbed into Baylith zeolite were also analyzed being found the following order of preference for the metal removals: nickel > zinc > lead. The competitiveness was evaluated simultaneously in the combination of 2 x 2 and the three metals.
Related Concept Videos
Microbial Leaching
Electrodeposition
Electrodeposition can...
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Extraction: Advanced Methods
Washing, Drying, and Ignition of Precipitates
Colloidal precipitates

