Related Experiment Video
Updated: Jul 17, 2026

Research Application of Laser-Induced Shock Wave for Studying Blast-Induced Cochlear Injury
Published on: March 1, 2024
Laser interferometry measurements of middle ear fluid and pressure effects on sound transmission
Rong Z Gan1, Chenkai Dai, Mark W Wood
1School of Aerospace and Mechanical Engineering and Bioengineering Center; University of Oklahoma, Norman, Oklahoma 73019, USA. rgan@ou.edu
Abstract:
An otitis media with effusion model in human temporal bones with two laser vibrometers was created in this study. By measuring the displacement of the stapes from the medial side of the footplate, the transfer function of the middle ear, which is defined as the displacement transmission ratio (DTR) of the tympanic membrane to footplate, was derived under different middle ear pressure and fluid in the cavity with a correction factor for cochlear load. The results suggest that the DTR increases with increasing frequency up to 4k Hz when the middle ear pressure was changing from 0 to 20 or -20 cm H20 (e.g., +/-196 daPa) and fluid level was increasing from 0 to a full middle ear cavity. The positive and negative pressures show different effects on the DTR. The effect of fluid on DTR varies between three frequency ranges: f < 1k, between 1k and 4k, and f > 4k Hz. These findings show how the efficiency of the middle ear system for sound transmission changes during the presence of fluid in the cavity and variations of middle ear pressure.
Related Concept Videos
Measurement of Fluid Pressure
A basic form of manometer is the piezometer, a vertical tube open at the top and filled with the same...
Intensity and Pressure of Sound Waves
Unlike the time average of a sinusoidal term, which is zero since it is positive and...
Deriving the Speed of Sound in a Liquid
The speed of sound in fluids can be derived by considering a mechanical wave propagating...
Sound as Pressure Waves
The pressure fluctuation depends on the difference in displacements between the successive points in the...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Sound Waves: Interference

